3–1 SUPERMODIFIED: Three tires on the right, one on the left

Supermodifieds have always been the most unique short track cars around. They are front engine, rear engine, side engine, with 2 wd or 4 wd. You name it, and it has been tried. The car built by Ken Reece was completely different. Ken is a great welder, builder and fabricator. He is also a dreamer. Ken has always had a love for circle track racing, go-carts, midgets, sprints, supers and Indy cars.

Ken wanted to build a car that would run on the outside groove of a pavement oval. With all the other supers hugging the bottom groove his car could go right around them on the outside, like a sprint car riding the rim.

In 1979 Ken started building his car. Three wheels on the outside, the front and back tires for steering and the center one for power. The opposite side was where the tire on the inside was also for power. The engine was a 494 cubic inch ZL-1 aluminum Chevy out of an old McLaren Can Am car. With fuel injection the engine produced 850 hp. The power train from the engine is direct drive to a quick change rear end sending power to the two center tires.

The frame was hand built out of aluminum and aircraft tubing. Ken built the frame without any blueprints or drawings. The car was built to be the lightest weight possible. The total weight of the car was a little over 1,300 pounds.

The brake system was disc brakes with drilled rotors with aluminum hubs. The cooling system was a triangular shaped radiator that was almost horizontal. Fresh air for the radiator came through fins in the nose of the car.

Steering was from the front and rear tires. They would turn in opposite directions when you turned the steering wheel. For example, with power steering when you turned left, the front wheel would turn left and the rear wheel would turn right.

Traction was provided by Goodyear racing tires that are 20 inches wide. To top it all off, the body was hand made out of .020 inch thickness aluminum. Hand formed with a fin coming off the rear of the car. The car had no spoilers or wings.

Now came the necessary testing. Ken asked his good friend, Tim Richmond, to give it a go. Tim was an excellent driver both in NASCAR and Indy cars. First testing was at Honda TRC testing facilities. Here there is a track that is a half mile circle with no straights. The car was so fast that the G forces loosened the strap on Tim’s helmet. The car ran very smoothly. Another part of the testing facilities is a 7 and half mile oval. After changing the gears in the quick change Tim hit the big track. After 4 laps and not going over 7,000 rpm the car was clocked at over 200 mph. Back in 1979 that was rare, only a couple of Indy and NASCAR cars that went that fast.

The next stop was Sandusky Speedway, a half mile high banked oval. With very few adjustments Tim took the car out and broke the track record. It is still an unofficial record even to this day. Ken and Tim were ready to tackle Oswego Speedway, but word got out about how fast Ken’s car was and before the start of the racing season the governing body changed the rules to be a little more specific: no rear engine cars, and “the supermodified must have four wheels- left front, right front, left rear, right rear”.

There are men that are geniuses who build cars that are better than others. Then they race and are so much faster than their competitors and for some reason they get banned. Ken dismantled his 3-1 car using what parts he could for a sprint car and crushed the original car. I wish Ken could have raced his creation, but, to be banned before it is even raced is just not right.

Posted in Uncategorized.

Leave a Reply

Your email address will not be published. Required fields are marked *